Basic Info.
Certification
CE, ISO9001
Application
Metal Recycling Machine, Metal Cutting Machine, Metal Straightening Machinery, Metal Spinning Machinery, Metal Processing Machinery Parts, Metal forging Machinery, Metal Engraving Machinery, Metal Drawing Machinery, Metal Coating Machinery, Metal Casting Machinery
Product Description
About MIM
Metal Injection Molding(MIM) is an advanced metal work process which combines the advantages of thermoplastic injection molding and powder metallurgy.
Many high-performing products are made by MIM technology, products such as electronics, consumer items, auto parts, medical equipments, military, aerospace, mobie phones, electronic radiators, sealed packages, junction boxes, industrial tools, fiber optics connectors, fluid spray systems, sports equipments, disks, automobile fuel supply and ignition systems, dental instrumentations and strengthen tools, pharmaceutical equipments, hand-held power tools, pumps, surgical devices, defense systems etc.
aterial | Material code | Density g/cm3 | Hardness HRC/HRB | Tensile strength Mpa | Elongation(%) |
Iron base alloys | Fe2Ni( normalcy) | 7.6 | 87HRB | 530 | 16 |
Fe2Ni(heat treatment) | 7.6 | 50HRC | 1630 | 3 |
Fe-8Ni(normalcy) | 7.58 | 92HRB | 65 | 20 |
Fe-8Ni(heat treatment) | 7.58 | 55HRC | 1750 | 5 |
Fe2NiCu0.5Mo(heat treatment) | 7.5 | 60HRC | 1830 | 6 |
Stainless steel | 316 | 7.7 | 62HRB | 630 | 50 |
17-4PH(sintered) | 7.65 | 25HRC | 950 | 7 |
17-4PH(heat treatment) | 7.65 | 45HRC | 1320 | 5 |
440C(heat treatment) | 7.6 | 60HRC | 600 | 10 |
420(heat treatment) | 7.5 | 50HRC | 950 | 7 |
Key Specifications/Special Features:
- Features:
- Material: stainless steel
- Finishing: Polish
- Good quality and high-accuracy
- MIM technology
- Product density is close to original material
- OEM service are provided
Quality control:- 1. Technicians self-check in production.
- 2. Engineer spot check in production
- 3. QC inspects after mass production finished.
- 4. International sales who were trained the technical knowledge about the products spot check before shipping.
Material Variety and Integrity- Superior strength, magnetic, and corrosion properties due to high density achieved when compared to conventional powdered metal, plastics and die-casting.
- Net shape components from otherwise hard to process materials like Superalloys, Tungsten alloys and Titanium.
- Isotropic and homogeneous microstructure for uniform material properties.
- Capability to create alloys that are not available in wrought or cast form.
- Ability to make engineered density materials for weight critical applications.
About MIMO
Suzhou Mimo Metal Technology Co.,Ltd. founded in 2006, is located in the beautiful Yangtze River delta - Suzhou Wujiang. Company covers an area 9500 square meters, owns mixing workshop, injection molding workshop, degreasing sintering workshop, testing center. Company has always adhere to the "scientific and technological innovation, cooperation and win-win, sincere and high efficiency, first-class service" for the service concept, use high-tech enterprises and brand building our company's future, we have professional team and mature technology, resolved to become a domestic leading professional MIM manufacturing companyProblems to be noticed in mechanical polishing?
Should pay attention to problems in mechanical polishing with sandpaper polishing, should pay attention to the following points:
(1) need to use sandpaper polishing stick or soft bamboo stick. When polishing round or spherical surface, the use of cork rod can better fit the circular surface and the surface of the sphere. Hard wood like cherry, polishing is more suitable for smooth surface. Trimming of the wood at the end of the surface shape of steel parts and kept consistent. Only in this way can avoid the wood or bamboo strips) acute angle of contact on the surface of steel caused by deep scratches.
(2) when used for different types of sand paper, the polishing direction should transform 45 ~ 90 degrees, so the former models of sandpaper polishing after leave the shadow stripe can be resolution. Before the change of different types of sand must be 100% pure cotton picks up like alcohol cleaning fluid to the polished surface was carefully wipe, because that will destroy the next a small gravel left on the surface polishing work as a whole. From the sandpaper polished into diamond grinding paste polishing, the cleaning process is equally important. All particles and kerosene must be thoroughly cleaned before the polishing is carried out.
(3) in order to avoid scratches and burn the surface of the workpiece, must be careful in using #1200 and #1500 sandpaper polishing. So it is necessary to load a light load and use the two step polishing method to polish the surface. For each type of sandpaper polishing should be in two different directions of two polishing, two direction between each rotation of 45 degrees ~ 90 degrees.How to control the cost during the process of MIM?
Metal injection molding is cost-effective compared other manufacturing process when produce complex shape, small size metal components in large quantity, and what else we can do to save more money?
Purchasing cost
The purity of powder metallurgy products between 95%-98% in general, and the procurement cost of raw materials is equal to the cost of each gram of metal materials costs x parts cubage x parts density. So to control the cost, the volume of the part is to be the precise calculation.
How to produce
The pressure is not the same different requirements of the product to, so the cost will be different. MIM productsused in the suppression of the equipment isn't more, and the speed should be fast.
Control the mold cost
We need to choose the high pressure materials when we choose the material as a mold material, which can ensure product specifications more accurate.
Contact with us in 24 hours.
Alan Shen
Sale of Jiangsu Mimo Metal Co.,LTD.
TEL:0512-63120634 Mob:+8618120098809
Web:mimomim.en.made-in-china.com
Address: Dong gu Road No.28 The High Shear Zone Tongli Town,Suzhou,Jiangsu Province, China
Address:
Suzhou Tongli Enjoys The High Shear Zone East Ancient Road 28, Suzhou, Jiangsu, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Industrial Equipment & Components, Manufacturing & Processing Machinery
Management System Certification:
ISO 9001, ISO 14001, ISO 14000, IATF16949, BSCI
Company Introduction:
Jiangsu MIMO is a leading high-tech enterprise that specialized in R&D, production and sales for Metal Injection Molding (MIM) technology. Jiangsu MIMO is located in the central of Yangtze River Delta, a geographically strategic location to make it easy for us to access customers.
Our advanced test equipment and facilities combined strength of skilled engineers, scientists, technicians and manufacturing associates, providing solid technical support for our customers. MIMO are ISO9001/TS16949/ISO14000 certified.
With the advanced MIM technology and exceptional surface treatment capability, products are being processed through plating, heating and precise grounding, and CNC workshop, which covers the whole process from product design to finished-product manufacturing. We also provide all-around services, including injection molding, insert molding and product assembly etc. We produce three-dimensional shapes of complex structural parts in material of iron, copper, alloy, stainless steel etc. In eight years, MIMO has accumulated a large number of customers all over the world.